Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

MARKITS 12.5mm / 10-spoke BOGIE WHEELSET

£5.56/$6.95

METAL centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

12.5mm = 3 feet 2" in 00 = 1087cm in H0
find out more

8 x Crank pins for driving wheels

£9.76/$12.20


find out more

Sundries = Motors etc

Scalelink |  Sundries = Motors etc

Page:   <<   <  1  2  3   View All (28) Page:   <<   <  1  2  3   View All (28)

Mashima 1630D motor

Mashima 1630D motor

Ref: SM-MHK1630

NEW LARGE MOTOR from Mashima.

L = 30mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 50mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 16xx-series Motor Brush

Mashima 16xx-series Motor Brush

Ref: SM-MHK16xx

Price: £4.80/$6.00 (Including VAT at 20%)

Mashima 1830D motor + 2 screws & suppressor

Mashima 1830D motor + 2 screws & suppressor

Ref: SM-MHK1830D-EP

L = 30mm. W = 18.4mm. D = 23.2mm. Fixing spacing holes 12mm

Overall length 50mm - shaft 2mm. NOW WITH 2 x M2 Screws & Suppressor

These motors have 10mm shafts.

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £54.00/$67.50 (Including VAT at 20%)

Mashima 1833D Motor

Mashima 1833D Motor

Ref: SM-MH1833

L = 33mm. W = 18.4mm. D = 23.2mm. Fixing spacing holes 12mm

Overall length 53mm - shaft 2mm. NOW WITH 2 x M2 SCREWS

These motors have 10mm shafts.

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £48.00/$60.00 (Including VAT at 20%)

Scalelink |  Sundries = Motors etc