Product Sections

Main Pages

Best Sellers

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components comensurate with a purchase of Scale Link wheels. i.e. 6 wheels = MCRNKPDL6 x 1

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.

For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components comensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 1 slotted axle

When the future of Markits is known, we will refiew the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components comensurate with a purchase of Scale Link wheels. i.e. 8 wheels = MCRNKPDL* x 1

When the future of Markits is known, we will refiew the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components comensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will refiew the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.56/$5.70

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)

Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)

£8.10/$10.13

This is a milled-brass hornblock for a standard 1/8th inch axle.

It is designed to be used in an etched chassis up to 0.60mm thick. (24/1000 inch).

You need 2 per axle.

TEMPORARILY UNAVAILABLE FROM MARKITS
find out more

Etched fret dimensions/ Dimensions photo-decoupe

Scalelink | Etched fret dimensions/ Dimensions photo-decoupe

Standard fret 203mm x 73mm

Standard fret 203mm x 73mm

Ref: INFO-FRA

This size applies to the majority of the etched frets in the following series:-

'SLF' - 'SNF' - 'SL32F' - 'SLOF' - 'SLMF'

There are exceptions...See next section

'O' foliage and `HO' frets 165mmm x 60mm

'O' foliage and `HO' frets 165mmm x 60mm

Ref: INFO-FRB

This size applies to 'O'-scale foliage and the 'HO' range

`Minifret' 102mm x 72mm

`Minifret' 102mm x 72mm

Ref: INFO-FRC

This size applies exclusively to the 'MINI' range

`Dolls House' fret 152mm x 90mm

`Dolls House' fret 152mm x 90mm

Ref: INFO-FRD

This size applies exclusively to the 'SL12F' range

Architectural frets 144mm x 80mm

Architectural frets 144mm x 80mm

Ref: INFO-FRE

This size applies exclusively to the 'SLAF' range

Scalelink | Etched fret dimensions/ Dimensions photo-decoupe