Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

12mm Bogie wheels - 8-spoke

12mm Bogie wheels - 8-spoke

£4.68/$5.85

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet in 00 104.4cm in H0
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/$6.75

Available again.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Romford hollow rivets x 2 - SMALL x 20

£4.80/$6.00

0.35"Dx. 0.83" Lx. 0.64" HD
find out more

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

£4.56/$5.70

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY
find out more

IMON (Ex-Shinohara) Track & Pointwork `HOn2.5'/OO9/HOe

Scalelink |  IMON (Ex-Shinohara) Track & Pointwork `HOn2.5'/OO9/HOe

Page:  1  2   >   >>   View All (15) Page:  1  2   >   >>   View All (15)

Code 60 Flexi-track - 500mm long

Code 60 Flexi-track - 500mm long

Ref: SDG715A

NOTE: Track can be sent by Royal Mail.

The UK POSTAL cost for 10 metres is £8.70 plus VAT.

Standard postal rates do not apply. Please select Shinohara track.

Sorry - sold out

Price: £6.35/$7.94 (Including VAT at 20%)

Code 60 Flexi-track - 50cm x 10

Code 60 Flexi-track - 50cm x 10

Ref: SDG715AB

NOTE: This track can be sent by Royal Mail.

The UK POSTAL cost for 10 x 50 centimetre lengths is £11.95 by Special Delivery

Standard postal rates do not apply as this would be a 'medium' parcel with £20.00 maximum compensation.. .

Now back in stock & manufactured by Imon from Shinohara tools.

Price: £63.50/$79.38 (Including VAT at 20%)

Imon Code 60 rail joiners x 12

Imon Code 60 rail joiners x 12

Ref: SDG740A

Supercedes SDG741A.

Price: £1.50/$1.88 (Including VAT at 20%)

Code 60 rail joiners x 50

Code 60 rail joiners x 50

Ref: SDG741A

03/09/2024 - 1 remaining

NOW Discontinued - see SDG740A

Price: £7.80/$9.75 (Including VAT at 20%)

Code 60 insulated rail joiners x 12

Code 60 insulated rail joiners x 12

Ref: SDG742A

40 remaining -26/11/2020

Price: £1.80/$2.25 (Including VAT at 20%)

Code 60 150mm Turnout LEFT-HAND

Code 60 150mm Turnout LEFT-HAND

Ref: SDG760A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - all gone

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 150mm Turnout RIGHT-HAND

Code 60 150mm Turnout RIGHT-HAND

Ref: SDG761A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - all gone

Price: £6.00/$7.50 (Including VAT at 20%)

Code 60 200mm Turnout LEFT- HAND

Code 60 200mm Turnout LEFT- HAND

Ref: SDG762A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining -12/09/2022

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 200mm Turnout RIGHT - HAND

Code 60 200mm Turnout RIGHT - HAND

Ref: SDG763A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 5 remaining -12/09/2022

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 75mm Straight rails x 10

Code 60 75mm Straight rails x 10

Ref: SDG764A

Only 5 remaining -12/09/2022

Price: £14.40/$18.00 (Including VAT at 20%)

Code 60 97mm Straight rails x 10

Code 60 97mm Straight rails x 10

Ref: SDG765A

Only 5 remaining -12/09/2022

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 150mm Curved rails x 12

Code 60 150mm Curved rails x 12

Ref: SDG767A

Sorry -all gone

Price: £24.00/$30.00 (Including VAT at 20%)

Scalelink |  IMON (Ex-Shinohara) Track & Pointwork `HOn2.5'/OO9/HOe