Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

18.45mm/16-spoke driving wheel x 1

18.45mm/16-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.

For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Hanazono 12 volt motor bogie 24.5mm wheelbase

Hanazono 12 volt motor bogie 24.5mm wheelbase

£45.00/$56.25

Fitted 10.5mm disk wheels

BODY size:- Length=31.75mm x Width=14.35mm x Height=14.55mm (above rail)

These units must have weight applied to operate successfully.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = MCRNKPDL6 x 1

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

40:1 Gearset 3/16" wheel bore/2.0mm worm

£10.20/$12.75

This set is designed for 'O'-gauge models.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore

Do you require a wheel, worm & mount? If so, see SLGS11.
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

40:1 Gearset 3/16" WHEEL BORE/2.0mm WORM

40:1 Gearset 3/16

£17.90/$22.38

This set is designed for 'O'-gauge models and includes the MM1240 mount and bushes.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore : Centres 12.25mm.

Markits equivalent MM7-1-1140

Do you just require a wheel & worm? If so, see SLGS11NM or SLGS15.

These are not the same gears as used in SLGS11.


find out more

'H0m'-Code70-BEMO-by-Shinohara-Track-Pointwork

Scalelink |  'H0m'-Code70-BEMO-by-Shinohara-Track-Pointwork

BEMO H0m Turnout - Right-Hand Curved by Shinohara

BEMO H0m Turnout - Right-Hand Curved by Shinohara

Ref: SDG4294-647

These turnouts were manufactured by Shinohara for BEMO. They have blackened rail

Outer radius 660mm - Inner radius 380mm

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel or a courier

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

They have the usual black finish to the rail & require a point-lever or point-motor.to operate correctly.

THEY DO NOT SELF-LATCH.

Price: £27.00/$33.75 (Including VAT at 20%)

BEMO H0m Turnout - Left-Hand Curved by Shinohara

BEMO H0m Turnout - Left-Hand Curved by Shinohara

Ref: SDG4294-657

These turnouts were manufactured by Shinohara for BEMO. They have blackened rail

Outer radius 660mm - Inner radius 380mm

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel or a courier

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

They have the usual black finish to the rail & require a point-lever or point-motor.to operate correctly.

THEY DO NOT SELF-LATCH.

Price: £27.00/$33.75 (Including VAT at 20%)

BEMO H0m Turnout - Right-Hand by Shinohara

BEMO H0m Turnout - Right-Hand by Shinohara

Ref: SDG4264-627

These turnouts were manufactured by Shinohara for BEMO. They have blackened rail

Length 166mm - Rasius 520mm - 12 degree

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel or a courier

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

They have the usual black finish to the rail & require a point-lever or point-motor.to operate correctly.

THEY DO NOT SELF-LATCH.

Price: £22.50/$28.13 (Including VAT at 20%)

BEMO H0m Turnout - Left-Hand by Shinohara

BEMO H0m Turnout - Left-Hand by Shinohara

Ref: SDG4264-637

These turnouts were manufactured by Shinohara for BEMO. They have blackened rail

Length 166mm - Rasius 520mm - 12 degree

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel or a courier

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

They have the usual black finish to the rail & require a point-lever or point-motor.to operate correctly.

THEY DO NOT SELF-LATCH.

Price: £22.50/$28.13 (Including VAT at 20%)

Scalelink |  'H0m'-Code70-BEMO-by-Shinohara-Track-Pointwork