Product Sections

Main Pages

Best Sellers

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

MARKITS 12.5mm / 10-spoke BOGIE WHEELSET

£5.56/$6.95

METAL centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

12.5mm = 3 feet 2" in 00 = 1087cm in H0
find out more

8 x Crank pins for driving wheels

£9.76/$12.20


find out more

O-scale (1:43) Roger Murray Figure Models (Retail only)

Scalelink | O-scale (1:43) Roger Murray Figure Models (Retail only)

Page:  1  2   >   >>   View All (14) Page:  1  2   >   >>   View All (14)

1:43 Figures

1:43 Figures

Ref: INFO9

Price: £4.50/$5.63 (Including VAT at 20%)

Kneeling, leaning forward with open-ended spanner

Kneeling, leaning forward with open-ended spanner

Ref: RMF-PW01

Price: £3.75/$4.69

Standing with a mobile phone

Standing with a mobile phone

Ref: RMF-PW02

Price: £3.75/$4.69

Standing, holding a large fishplate bolt adjuster

Standing, holding a large fishplate bolt adjuster

Ref: RMF-PW03

Price: £3.75/$4.69

Lying prone with head raised

Lying prone with head raised

Ref: RMF-PW04

Price: £3.75/$4.69

Kneeling upright with both arms forward

Kneeling upright with both arms forward

Ref: RMF-PW05

Price: £3.75/$4.69

Standing with `AVO' type tester on shoulder

Standing with `AVO' type tester on shoulder

Ref: RMF-PW06

Price: £3.75/$4.69

Standing, a look-out with two flags

Standing, a look-out with two flags

Ref: RMF-PW07

Price: £3.75/$4.69

Kneeling, on one knee, an ARC welder

Kneeling, on one knee, an ARC welder

Ref: RMF-PW08

Price: £3.75/$4.69

Kneeling, on one knee, a GAS welder

Kneeling, on one knee, a GAS welder

Ref: RMF-PW09

Price: £3.75/$4.69

Hand-held modular controller

Hand-held modular controller

Ref: RMLC-101B

12v DC unit - requires 14-18v AC supply - 1.5amp max.

Price: £35.00/$43.75

Portable Generator Kit

Portable Generator Kit

Ref: RM-ETLG

(Shown yellow in the picture)

Price: £7.00/$8.75

Scalelink | O-scale (1:43) Roger Murray Figure Models (Retail only)