Product Sections
Main Pages
Best Sellers
Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components comensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axlesWhen the future of Markits is known, we will refiew the situation.Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.Markits DeLuxe Crankpin sets (8)
NEW STOCK - NEW PRICE
Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components comensurate with a purchase of Scale Link wheels. i.e. 8 wheels = MCRNKPDL* x 1When the future of Markits is known, we will refiew the situation.Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.Markits 1/8th inch axle bush x 12
3.7mm OD x 2mm deep x 1/8th bore.
find out more
Romford 16.5mm axle with flat for grub screw (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.
For spacing washers see WPY33Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components comensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 1 slotted axleWhen the future of Markits is known, we will refiew the situation.Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.Markits DeLuxe Crankpin sets (6)
NEW STOCK - NEW PRICE
Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components comensurate with a purchase of Scale Link wheels. i.e. 6 wheels = MCRNKPDL6 x 1Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.15mm/12-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0THESE WHEELS ARE SOLD SINGLY20mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0THESE WHEELS ARE SOLD SINGLYEtched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)
This is a milled-brass hornblock for a standard 1/8th inch axle.
It is designed to be used in an etched chassis up to 0.60mm thick. (24/1000 inch).You need 2 per axle.TEMPORARILY UNAVAILABLE FROM MARKITS
