Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

12mm Bogie wheels - 8-spoke

12mm Bogie wheels - 8-spoke

£4.68/$5.85

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet in 00 104.4cm in H0
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/$6.75

Available again.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Romford hollow rivets x 2 - SMALL x 20

£4.80/$6.00

0.35"Dx. 0.83" Lx. 0.64" HD
find out more

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

£4.56/$5.70

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY
find out more

`HO/OO' Shinohara DCC-ready Pointwork Code 83 only

Scalelink |  `HO/OO' Shinohara DCC-ready Pointwork Code 83 only

Page:  1  2  3   >   >>   View All (26) Page:  1  2  3   >   >>   View All (26)

Code 83 DCC No 3 Turnout - Y

Code 83 DCC No 3 Turnout - Y

Ref: SDG8893

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 9 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 4 Turnout - Left

Code 83 DCC No 4 Turnout - Left

Ref: SDG8801

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 16 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 4 Turnout - Right

Code 83 DCC No 4 Turnout - Right

Ref: SDG8802

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 16 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 4 Turnout - Y

Code 83 DCC No 4 Turnout - Y

Ref: SDG8807

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 10 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 5 Turnout - Left

Code 83 DCC No 5 Turnout - Left

Ref: SDG8891

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 75cm / 29.53" : Length 28cm / 11.02" ; Frog 11.26 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 5 Turnout - Right

Code 83 DCC No 5 Turnout - Right

Ref: SDG8892

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 75cm / 29.53" : Length 28cm / 11.02" ; Frog 11.26 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 11 remaining -12/09/2022

For manual operation see SDG651 in Shinohara accessories

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 5 Turnout - Y

Code 83 DCC No 5 Turnout - Y

Ref: SDG8883

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 75cm / 29.53" : Length 26.7cm / 10.5" ; Frog 11.26 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 6 remaining -12/09/2022

For manual operation see SDG651 in Shinohara accessories

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 6 Turnout - Left

Code 83 DCC No 6 Turnout - Left

Ref: SDG8803

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 DCC No 6 Turnout - Right

Code 83 DCC No 6 Turnout - Right

Ref: SDG8804

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 12 remaining -12/09/2022

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 DCC No 6 Curved Turnout - Left

Code 83 DCC No 6 Curved Turnout - Left

Ref: SDG8826

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/41cm 24"/16.5" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 6 Curved Turnout - Right

Code 83 DCC No 6 Curved Turnout - Right

Ref: SDG8827

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 7 Curved Turnout - Left

Code 83 DCC No 7 Curved Turnout - Left

Ref: SDG8894

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 711mm/610mm (28"/24") Length 352mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 16 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Scalelink |  `HO/OO' Shinohara DCC-ready Pointwork Code 83 only