Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

MARKITS 12.5mm / 10-spoke BOGIE WHEELSET

£5.56/$6.95

METAL centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

12.5mm = 3 feet 2" in 00 = 1087cm in H0
find out more

8 x Crank pins for driving wheels

£9.76/$12.20


find out more

IMON (Ex-Shinohara) Track & Pointwork `HOn2.5'/OO9/HOe

Scalelink |  IMON (Ex-Shinohara) Track & Pointwork `HOn2.5'/OO9/HOe

Show First 12 Product(s) Show First 12 Product(s)

Code 60 Flexi-track - 500mm long

Code 60 Flexi-track - 500mm long

Ref: SDG715A

NOTE: Track can be sent by Royal Mail.

The UK POSTAL cost for 10 metres is £8.70 plus VAT.

Standard postal rates do not apply. Please select Shinohara track.

Sorry - sold out

Price: £6.35/$7.94 (Including VAT at 20%)

Code 60 Flexi-track - 50cm x 10

Code 60 Flexi-track - 50cm x 10

Ref: SDG715AB

NOTE: This track can be sent by Royal Mail.

The UK POSTAL cost for 10 x 50 centimetre lengths is £11.95 by Special Delivery

Standard postal rates do not apply as this would be a 'medium' parcel with £20.00 maximum compensation.. .

Now back in stock & manufactured by Imon from Shinohara tools.

Price: £63.50/$79.38 (Including VAT at 20%)

Imon Code 60 rail joiners x 12

Imon Code 60 rail joiners x 12

Ref: SDG740A

Supercedes SDG741A.

Price: £1.50/$1.88 (Including VAT at 20%)

Code 60 rail joiners x 50

Code 60 rail joiners x 50

Ref: SDG741A

03/09/2024 - 1 remaining

NOW Discontinued - see SDG740A

Price: £7.80/$9.75 (Including VAT at 20%)

Code 60 insulated rail joiners x 12

Code 60 insulated rail joiners x 12

Ref: SDG742A

40 remaining -26/11/2020

Price: £1.80/$2.25 (Including VAT at 20%)

Code 60 150mm Turnout LEFT-HAND

Code 60 150mm Turnout LEFT-HAND

Ref: SDG760A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - all gone

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 150mm Turnout RIGHT-HAND

Code 60 150mm Turnout RIGHT-HAND

Ref: SDG761A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - all gone

Price: £6.00/$7.50 (Including VAT at 20%)

Code 60 200mm Turnout LEFT- HAND

Code 60 200mm Turnout LEFT- HAND

Ref: SDG762A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining -12/09/2022

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 200mm Turnout RIGHT - HAND

Code 60 200mm Turnout RIGHT - HAND

Ref: SDG763A

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 5 remaining -12/09/2022

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 75mm Straight rails x 10

Code 60 75mm Straight rails x 10

Ref: SDG764A

Only 5 remaining -12/09/2022

Price: £14.40/$18.00 (Including VAT at 20%)

Code 60 97mm Straight rails x 10

Code 60 97mm Straight rails x 10

Ref: SDG765A

Only 5 remaining -12/09/2022

Price: £18.00/$22.50 (Including VAT at 20%)

Code 60 150mm Curved rails x 12

Code 60 150mm Curved rails x 12

Ref: SDG767A

Sorry -all gone

Price: £24.00/$30.00 (Including VAT at 20%)

Code 60 150mm Curved rails x 1

Code 60 150mm Curved rails x 1

Ref: SDG767A-S

Sorry -all gone

Price: £2.16/$2.70 (Including VAT at 20%)

Code 60 200mm Curved rails x 12

Code 60 200mm Curved rails x 12

Ref: SDG768A

Sorry -all gone

Price: £24.00/$30.00 (Including VAT at 20%)

Code 60 200mm Curved rails x 1

Code 60 200mm Curved rails x 1

Ref: SDG768A-S

Sorry -all gone

Price: £2.16/$2.70 (Including VAT at 20%)

Scalelink |  IMON (Ex-Shinohara) Track & Pointwork `HOn2.5'/OO9/HOe