Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

12mm Bogie wheels - 8-spoke

12mm Bogie wheels - 8-spoke

£4.68/$5.85

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet in 00 104.4cm in H0
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/$6.75

Available again.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Romford hollow rivets x 2 - SMALL x 20

£4.80/$6.00

0.35"Dx. 0.83" Lx. 0.64" HD
find out more

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

£4.56/$5.70

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY

find out more

Sundries = Motors etc

Scalelink |  Sundries = Motors etc

Page:   <<   <  1  2  3   >   >>   View All (28) Page:   <<   <  1  2  3   >   >>   View All (28)

Mashima 1024D Motor

Mashima 1024D Motor

Ref: SM-MHK1024

L = 24mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 44mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

SEE SM-MHK1024D-EP

Price: £33.00/$41.25 (Including VAT at 20%)

Mashima 1024D Motor with screws & suppressor.

Mashima 1024D Motor with screws & suppressor.

Ref: SM-MHK1024D-EP

L = 24mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 44mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS & SUPPRESSOR.

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £32.50/$40.63

Mashima 10xx-series Motor Brush x 2

Mashima 10xx-series Motor Brush x 2

Ref: SM-MHK10xx

Price: £6.00/$7.50 (Including VAT at 20%)

Mashima 1220D Motor

Mashima 1220D Motor

Ref: SM-MHK1220

L = 20mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £39.00/$48.75 (Including VAT at 20%)

Mashima 1224D Motor

Mashima 1224D Motor

Ref: SM-MHK1224

L = 24mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 44mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £39.00/$48.75 (Including VAT at 20%)

Mashima 12xx-series Motor Brush x 2

Mashima 12xx-series Motor Brush x 2

Ref: SM-MHK12xx

Price: £3.60/$4.50 (Including VAT at 20%)

Mashima 12xx-series Motor Brush & Spring x 2

Mashima 12xx-series Motor Brush & Spring x 2

Ref: SM-MHK12BS

Sorry sold out.. Brush available - no springs...

Price: £6.00/$7.50 (Including VAT at 20%)

Mashima M-16K-S

Mashima M-16K-S

Ref: SM-M16K-S

5-pole open-frame motor. Size 16mm x 13mm x 9.3mm. 10mm single shaft

Includes 2 x M1.4 screws.

ALL GONE - SEE Hanazono above

Price: £16.80/$21.00 (Including VAT at 20%)

Mashima 1620D motor

Mashima 1620D motor

Ref: SM-MHK1620

L = 20mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 40mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

All Gone..

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 1624D motor

Mashima 1624D motor

Ref: SM-MHK1624

L = 24mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 44mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 1626DX motor

Mashima 1626DX motor

Ref: SM-MHK1626DX

L = 26mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 1628D motor

Mashima 1628D motor

Ref: SM-MHK1628

L = 28mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Scalelink |  Sundries = Motors etc