Product Sections
Main Pages
Best Sellers
16mm /12-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010.Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0THESE WHEELS ARE SOLD SINGLY18.45mm/16-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: March 2018Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0THESE WHEELS ARE SOLD SINGLYRomford 16.5mm axle with flat for grub screw (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.
For spacing washers see WPY33Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axlesWhen the future of Markits is known, we will review the situation.Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.Hanazono 12 volt motor bogie 24.5mm wheelbase
Fitted 10.5mm disk wheels
BODY size:- Length=31.75mm x Width=14.35mm x Height=14.55mm (above rail)These units must have weight applied to operate successfully.For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costs6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axlesWhen the future of Markits is known, we will review the situation.Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.Markits DeLuxe Crankpin sets (6)
NEW STOCK - NEW PRICE
Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = MCRNKPDL6 x 1Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.40:1 Gearset 3/16" wheel bore/2.0mm worm
This set is designed for 'O'-gauge models.
Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm boreDo you require a wheel, worm & mount? If so, see SLGS11.21mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0THESE WHEELS ARE SOLD SINGLY40:1 Gearset 3/16" WHEEL BORE/2.0mm WORM
This set is designed for 'O'-gauge models and includes the MM1240 mount and bushes.
Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore : Centres 12.25mm.Markits equivalent MM7-1-1140Do you just require a wheel & worm? If so, see SLGS11NM or SLGS15. These are not the same gears as used in SLGS11.
