[sd.hide]-->
Product Sections
Main Pages
Best Sellers
Romford 16.5mm axle with flat for grub screw (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.
Includes two brass fixing nuts.Slotted for improved grub screw location.For spacing washers see WPY33Markits 1/8th inch axle bush x 12
3.7mm OD x 2mm deep x 1/8th bore.
find out more
6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.Markits DeLuxe Crankpin sets (6)
NEW STOCK - NEW PRICE
find out more
Markits DeLuxe Crankpin sets (8)
NEW STOCK - NEW PRICE
find out more
Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.
Includes two brass fixing nuts.For spacing washers see WPY33Etched de-insulating pick-ups for Scale Link Driving Wheels x 6
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains6 pick-ups, usually sufficient for two or three locomotives..Etched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.MARKITS 12.5mm / 10-spoke BOGIE WHEELSET
METAL centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 12.5mm = 3 feet 2" in 00 = 1087cm in H08 x Crank pins for driving wheels