Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£6.00/$7.50

.Limited quantity available 17/06/2025
find out more

18.45mm/16-spoke driving wheel x 1

18.45mm/16-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

RESTRICTION REMOVED for sensible quantites.
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK

RESTRICTION REMOVED for sensible quantites.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK

ORESTRICTION REMOVED for sensible quantites.
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

16mm Wagon/Coach/Tender wheels - 12-spoke

16mm Wagon/Coach/Tender wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

26mm Pin-point 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

Hanazono 12 volt motor bogie 26.0mm wheelbase

Hanazono 12 volt motor bogie 26.0mm wheelbase

£46.80/$58.50

Fitted with 12.0mm disc wheels.

BODY size:- Length=35.75mm x Width=14.35mm x Height=15.30mm (above rails)

These units must have weight applied to operate successfully.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.

Scalelink |  Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.

Page:   <<   <  1  2  3  4   >   >>   View All (48) Page:   <<   <  1  2  3  4   >   >>   View All (48)

38:1 Gearset 1/8 WHEEL BORE/2.0mm WORM + MOUNT

38:1 Gearset 1/8 WHEEL BORE/2.0mm WORM + MOUNT

Ref: SLGS21

Markits gearset MM-1-85322s

Suits motors with 8.5mm and 10mm mounting spacings

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £15.48/$19.35 (Including VAT at 20%)

38:1 GEARSET 1/8 WHEEL BORE/ 1.5 & 2.0mm WORMS

38:1 GEARSET 1/8 WHEEL BORE/ 1.5 & 2.0mm WORMS

Ref: SLGS22

Markits gearset MM-1-8538prs

Suits 8.5 and 10mm mounting spacings & includes 1.5mm & 2.0mm worms..

SLGS20 has been phased out by Markits.

SLGS21 will be phased out by Markits.

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £16.50/$20.63 (Including VAT at 20%)

Markits flywheel 12mm diameter x 6mm x 1.5mm bore

Markits flywheel 12mm diameter x 6mm x 1.5mm bore

Ref: MFLY12061

Uses a Grub-screw to secure onto the motor shaft.

Price: £5.40/$6.75 (Including VAT at 20%)

Markits flywheel 12mm diameter x 6mm x 2.0mm bore

Markits flywheel 12mm diameter x 6mm x 2.0mm bore

Ref: MFLY12062

Uses a Grub-screw to secure onto the motor shaft.

Price: £5.40/$6.75 (Including VAT at 20%)

Markits Medium 2.2mm long Handrail Knobs x 12

Markits Medium 2.2mm long Handrail Knobs x 12

Ref: MR4HRK-M-12

Markits Medium Handrail Knobs have a 1mm ball and are 2.2mm long overall.

NOTE: There is also a 2.0mm version

For Standard Handrail Knobs (1.6mm) see W&T Paccessory WPY42 & WPY55

For Long Handrail Knobs (3mm) see W&T Paccessory WPY56.

Price: £4.20/$5.25 (Including VAT at 20%)

M1.6 x 2mm Steel Grub-screws x 10

M1.6 x 2mm Steel Grub-screws x 10

Ref: SM-MMS03

Price: £3.60/$4.50 (Including VAT at 20%)

10BA Grub-screws x 5 long & 5 short

10BA Grub-screws x 5 long & 5 short

Ref: SM-MMS04

Price: £3.60/$4.50 (Including VAT at 20%)

10BA Grub-screws x 10 short

10BA Grub-screws x 10 short

Ref: SM-MMS04S

Price: £3.60/$4.50 (Including VAT at 20%)

M2.5 Grub screws x 5 x 2.5mm + 5 x 3mm for SLGS11

M2.5 Grub screws x 5 x 2.5mm + 5 x 3mm for SLGS11

Ref: SM-MMS05

Price: £3.60/$4.50 (Including VAT at 20%)

Markits gearbox/motor mount

Markits gearbox/motor mount

Ref: MM108

Designed for use with motors with 8mm spacing between mounting screws.

(Mashima 16xx series/H1024) 8.5mm wide - Romford original gears.

Price: £4.80/$6.00 (Including VAT at 20%)

Markits gearbox/motor-mount

Markits gearbox/motor-mount

Ref: MM110

Designed for use with motors with 10mm spacing between mounting screws.

(Mashima 16xx series/1024) 8.5mm wide - Romford original gears.

Price: £4.80/$6.00 (Including VAT at 20%)

Markits gearbox/motor-mount

Markits gearbox/motor-mount

Ref: MM208

This product is being discontinued and will be replaced by MM208N

This uses NARROW Romford 20-series gears SLGS03--S (1.5mm worm) or SLGS04-S (2mm worm)

Price: £4.80/$6.00 (Including VAT at 20%)

Scalelink |  Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.