Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

MARKITS 12.5mm / 10-spoke BOGIE WHEELSET

£5.56/$6.95

METAL centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

12.5mm = 3 feet 2" in 00 = 1087cm in H0
find out more

8 x Crank pins for driving wheels

£9.76/$12.20


find out more

OO-scale (1:76) Smiths Components

Scalelink | OO-scale (1:76) Smiths Components

Page:   <<   <  1  2  3  4  5  ...   >   >>   View All (76) Page:   <<   <  1  2  3  4  5  ...   >   >>   View All (76)

G.W.R. Locomotive Lamp Irons

G.W.R. Locomotive Lamp Irons

Ref: WTSA17

Price: £4.80/$6.00 (Including VAT at 20%)

Wagon W-Irons

Wagon W-Irons

Ref: WTSA18

Pack of etched Brass compensated type standard wagon W Irons.

Price: £7.20/$9.00 (Including VAT at 20%)

G.W.R. Old Type Etched Load Gauge Bow

G.W.R. Old Type Etched Load Gauge Bow

Ref: WTSA19

Price: £3.60/$4.50 (Including VAT at 20%)

Head and Coach Board Sets

Head and Coach Board Sets

Ref: INFO-S3

WTHB01 to WTHB24:

B.R. Head and coach board set in 4mm scale for the named trains of the 1950s. The headboards are cast in White metal and are unpainted. The 6 pairs of coachboards are printed in the correct regional colours.

Cornish Riviera Express WR

Cornish Riviera Express WR

Ref: WTHB01

Price: £3.60/$4.50 (Including VAT at 20%)

Torbay Express WR

Torbay Express WR

Ref: WTHB02

Price: £3.60/$4.50 (Including VAT at 20%)

South Wales Pullman WR

South Wales Pullman WR

Ref: WTHB03

Price: £3.60/$4.50 (Including VAT at 20%)

The Royal Scot MR

The Royal Scot MR

Ref: WTHB04

Price: £3.60/$4.50 (Including VAT at 20%)

The Flying Scotsman ER

The Flying Scotsman ER

Ref: WTHB05

Price: £3.60/$4.50 (Including VAT at 20%)

The Pines Express MR

The Pines Express MR

Ref: WTHB06

Price: £3.60/$4.50 (Including VAT at 20%)

The Midlander MR

The Midlander MR

Ref: WTHB07

Price: £3.60/$4.50 (Including VAT at 20%)

The Bournmouth Belle SR

The Bournmouth Belle SR

Ref: WTHB08

Price: £3.60/$4.50 (Including VAT at 20%)

Scalelink | OO-scale (1:76) Smiths Components