Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY


find out more

Omen - Young lady in a mini-dress (1960's)

Omen - Young lady in a mini-dress (1960's)

£3.50/$4.38

This figure is painted for illustration only - the kit is NOT painted
find out more

Hanazono 12 volt motor bogie 24.5mm wheelbase

Hanazono 12 volt motor bogie 24.5mm wheelbase

£45.00/$56.25

Fitted 10.5mm disk wheels

BODY size:- Length=31.75mm x Width=14.35mm x Height=14.55mm (above rail)

These units must have weight applied to operate successfully.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.

For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.56/$5.70

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = MCRNKPDL6 x 1

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

18.45mm/16-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

HO/OO' Code 83 IMON Track & Shinohara Pointwork

Scalelink |  HO/OO' Code 83 IMON Track & Shinohara Pointwork

Page:   <<   <  1  2  3   >   >>   View All (35) Page:   <<   <  1  2  3   >   >>   View All (35)

Code 83 No 6 Turnout - Left

Code 83 No 6 Turnout - Left

Ref: SDG803

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 4 remaining -12/09/2022

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 No 6 Turnout - Right

Code 83 No 6 Turnout - Right

Ref: SDG804

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

CURRENTLY SOLD OUT.

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 No 6 Curved Turnout - Left

Code 83 No 6 Curved Turnout - Left

Ref: SDG826

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 16 remaining -12/09/2022

Price: £30.00/$37.50 (Including VAT at 20%)

Code 83 No 6 Curved Turnout - Right

Code 83 No 6 Curved Turnout - Right

Ref: SDG827

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £30.00/$37.50 (Including VAT at 20%)

Code 83 No 7 Curved Turnout - Left

Code 83 No 7 Curved Turnout - Left

Ref: SDG894

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 711mm/610mm (28"/24") Length 352mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £30.00/$37.50 (Including VAT at 20%)

Code 83 No 7 Curved Turnout - Right

Code 83 No 7 Curved Turnout - Right

Ref: SDG895

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 711mm/610mm (28"/24") Length 352mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining -12/09/2022

Price: £30.00/$37.50 (Including VAT at 20%)

Code 83 No 7.5 Curved Turnout - Left

Code 83 No 7.5 Curved Turnout - Left

Ref: SDG888

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 813mm/711mm (32"/28") Length 413mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ALL GONE

Price: £30.00/$37.50 (Including VAT at 20%)

Code 83 No 7.5 Curved Turnout - Right

Code 83 No 7.5 Curved Turnout - Right

Ref: SDG889

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 813mm/711mm (32"/28") Length 413mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ALL GONE

Price: £30.00/$37.50 (Including VAT at 20%)

Code 83 No 8 Turnout - Left

Code 83 No 8 Turnout - Left

Ref: SDG805

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - all gone

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 No 8 Turnout - Right

Code 83 No 8 Turnout - Right

Ref: SDG806

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - all gone

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 No 8 Curved Turnout - Left

Code 83 No 8 Curved Turnout - Left

Ref: SDG828

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 10 remaining -12/09/2022

Price: £31.20/$39.00 (Including VAT at 20%)

Code 83 No 8 Curved Turnout - Right

Code 83 No 8 Curved Turnout - Right

Ref: SDG829

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 10 remaining -12/09/2022

Price: £31.20/$39.00 (Including VAT at 20%)

Scalelink |  HO/OO' Code 83 IMON Track & Shinohara Pointwork