Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

MARKITS 12.5mm / 10-spoke BOGIE WHEELSET

£5.56/$6.95

METAL centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

12.5mm = 3 feet 2" in 00 = 1087cm in H0
find out more

8 x Crank pins for driving wheels

£9.76/$12.20


find out more

O-scale (1:43) S & D Building Bags (Retail only)

Scalelink | O-scale (1:43) S & D Building Bags (Retail only)

Page:   <<   <  1  2  3  4  5   >   >>   View All (50) Page:   <<   <  1  2  3  4  5   >   >>   View All (50)

Pair of single canopy brackets

Pair of single canopy brackets

Ref: PHBB26

Price: £2.50/$3.13

4 downpipe spouts for 1/8

4 downpipe spouts for 1/8" pipe

Ref: PHBB27

Price: £1.50/$1.88

Pair of wall mounting corbels

Pair of wall mounting corbels

Ref: PHBB25

Price: £1.50/$1.88

Pair of hoppers for 1/8

Pair of hoppers for 1/8" pipe

Ref: PHBB28

Price: £1.50/$1.88

Pair of X-shaped wall support plates

Pair of X-shaped wall support plates

Ref: PHBB29

Price: £1.50/$1.88

Pair of S-shaped wall support plates

Pair of S-shaped wall support plates

Ref: PHBB30

Price: £1.50/$1.88

Pair of O-shaped wall support plates

Pair of O-shaped wall support plates

Ref: PHBB31

Price: £1.50/$1.88

Pair of Angle-iron canopy supports

Pair of Angle-iron canopy supports

Ref: PHBB32

1 of each, left & right-hand. 3.05m to scale

Price: £4.00/$5.00

2 bendable pipes and 4 junction ring fixings

2 bendable pipes and 4 junction ring fixings

Ref: PHBB33

For 3/32" pipes

Price: £1.50/$1.88

Large round chimney with serrated top

Large round chimney with serrated top

Ref: PHBB34

Price: £1.00/$1.25

Large octagonal chimney

Large octagonal chimney

Ref: PHBB35

Price: £1.20/$1.50

Tall chimney with 5-point crown

Tall chimney with 5-point crown

Ref: PHBB36

1.2m to scale

Price: £1.00/$1.25

Scalelink | O-scale (1:43) S & D Building Bags (Retail only)