Product Sections
Main Pages
Best Sellers
Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
Owing to the current closure of Markits, following Mark's death, we are currently only supplying these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axlesWhen the future of Markits is known, we will review the situation.Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.21mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0THESE WHEELS ARE SOLD SINGLY20mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0THESE WHEELS ARE SOLD SINGLY24 x Crank pins for driving wheels
4 x Threaded crankpins & slotted retainers.
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
find out more
40:1 Gearset 3/16" wheel bore/2.0mm worm
This set is designed for 'O'-gauge models.
Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm boreDo you require a wheel, worm & mount? If so, see SLGS11.Code 100 No 6 Curved Turnout - Left
NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.
Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS. Customers outside the UK can only receive track by International standard parcel unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shippingRadii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.Only 7 remaining -05/03/2024For manual operation see SDG651 in Shinohara accessoriesMashima 1015D Motor
L = 15mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm
Overall length 35mm - 1.5mm shaftNOW WITH 2 x M1.4 SCREWSPlease note that we are limiting ALL customers to 2 of any Mashima motor to make them availableto as many modellers as possible.Mashima 1624D motor
L = 24mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm
Overall length = 44mm - shaft 2mmNOW WITH 2 x M2 SCREWSPlease note that we are limiting ALL customers to 2 of any Mashima motor to make them availableto as many modellers as possible.1:35 German Markings
An etched brass, reusable stencil.
find out more
