Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

18.45mm/16-spoke driving wheel x 1

18.45mm/16-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.

For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Hanazono 12 volt motor bogie 24.5mm wheelbase

Hanazono 12 volt motor bogie 24.5mm wheelbase

£45.00/$56.25

Fitted 10.5mm disk wheels

BODY size:- Length=31.75mm x Width=14.35mm x Height=14.55mm (above rail)

These units must have weight applied to operate successfully.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = MCRNKPDL6 x 1

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

40:1 Gearset 3/16" wheel bore/2.0mm worm

£10.20/$12.75

This set is designed for 'O'-gauge models.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore

Do you require a wheel, worm & mount? If so, see SLGS11.
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

40:1 Gearset 3/16" WHEEL BORE/2.0mm WORM

40:1 Gearset 3/16

£17.90/$22.38

This set is designed for 'O'-gauge models and includes the MM1240 mount and bushes.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore : Centres 12.25mm.

Markits equivalent MM7-1-1140

Do you just require a wheel & worm? If so, see SLGS11NM or SLGS15.

These are not the same gears as used in SLGS11.


find out more

Markits/Romford Products NOTE the temporary restrictions & conditions.

Scalelink |  Markits/Romford Products NOTE the temporary restrictions & conditions.

Page:   <<   <  1  2  3   >   >>   View All (29) Page:   <<   <  1  2  3   >   >>   View All (29)

Romford HOn3 axles.

Romford HOn3 axles.

Ref: RMA/HON3

Includes two brass fixing nuts For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £1.98/$2.48 (Including VAT at 20%)

Romford TT axle

Romford TT axle

Ref: RMA-TT

This axle is not intended for use with TT120 For spacing washers see WPY33

OUT OF STOCK UNTIL FURTHER NOTICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £1.98/$2.48 (Including VAT at 20%)

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

Ref: RMSD01

Available again.

Price: £6.00/$7.50 (Including VAT at 20%)

25 x Standard crankpin fixing washers

25 x Standard crankpin fixing washers

Ref: MCRNKPFW

Price: £3.96/$4.95 (Including VAT at 20%)

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

Ref: MCRNKPDL6

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = MCRNKPDL6 x 1

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £6.00/$7.50 (Including VAT at 20%)

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

Ref: MCRNKPDL8

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 8 wheels = MCRNKPDL8 x 1

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £7.94/$9.93 (Including VAT at 20%)

Markits Crankpin Bushes x 10

Markits Crankpin Bushes x 10

Ref: MCRNKPB

Ideal for bushing connecting rods etc

Price: £2.88/$3.60 (Including VAT at 20%)

Markits DeLuxe Outside Cranks x 2

Markits DeLuxe Outside Cranks x 2

Ref: MCRNKOSDL

Crank throw is 3.5mm.

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 packs

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £4.80/$6.00 (Including VAT at 20%)

Markits DeLuxe Outside Cranks x 6

Markits DeLuxe Outside Cranks x 6

Ref: MCRNKOSDL2-6

A more convenient way to buy 6 of this item. Crank throw is 3.5mm.

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 1 pack

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £14.40/$18.00 (Including VAT at 20%)

Markits 00 Keyed Outside Cranks & 1/8

Markits 00 Keyed Outside Cranks & 1/8" axle

Ref: M4CRNKOX00DL2

Markits reference is M4CRNKOx00DL2

This product requires the following tools which are NOT included - 1mm hex key & Mini Screwdriver...

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 packs

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £7.80/$9.75 (Including VAT at 20%)

Markits BR Return Crank Set

Markits BR Return Crank Set

Ref: MCRNKPRTN-B

A pair of Stainless Steel return cranks for Walschaerts vale gears.

Markits reference is M4CRNKPRtnBRs = BR SKEFCO type

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 1 pack

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £9.76/$12.20 (Including VAT at 20%)

Markits SR/LMS Return Crank Set

Markits SR/LMS Return Crank Set

Ref: MCRNKPRTNSR

A pair of Stainless Steel return cranks for Walschaerts vale gears.

Markits reference is M4CRNKPRtnSRs = SR SKEFCO type

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 1 pack

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.

Price: £9.76/$12.20 (Including VAT at 20%)

Scalelink |  Markits/Romford Products NOTE the temporary restrictions & conditions.