Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/$9.06

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE
find out more

12mm Bogie wheels - 8-spoke

12mm Bogie wheels - 8-spoke

£4.68/$5.85

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet in 00 104.4cm in H0
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/$6.75

Available again.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Romford hollow rivets x 2 - SMALL x 20

£4.80/$6.00

0.35"Dx. 0.83" Lx. 0.64" HD
find out more

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

£4.56/$5.70

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY
find out more

OO/HO Locomotive Driving Wheels, axles, crankpins

Scalelink | OO/HO Locomotive Driving Wheels, axles, crankpins

Page:   <<   <  1  2  3  4  5   >   >>   View All (60) Page:   <<   <  1  2  3  4  5   >   >>   View All (60)

Romford HOn3 axles.

Romford HOn3 axles.

Ref: RMA/HON3

Includes two brass fixing nuts

For spacing washers see WPY33

Price: £1.98/$2.48 (Including VAT at 20%)

Romford TT axle

Romford TT axle

Ref: RMA-TT

This axle is not intended for use with TT120

For spacing washers see WPY33

OUT OF STOCK UNTIL FURTHER NOTICE

Price: £1.98/$2.48 (Including VAT at 20%)

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

Ref: RMSD01

Available again.

Price: £5.40/$6.75 (Including VAT at 20%)

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

Ref: SWD1

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.

Price: £2.40/$3.00 (Including VAT at 20%)

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Ref: SWD1-6

SORRY - TEMPORARILY UNAVAILABLE..

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..

Price: £6.90/$8.63 (Including VAT at 20%)

12mm/12-spoke Driving wheel x 1

12mm/12-spoke Driving wheel x 1

Ref: SW1212D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 12mm. 3 feet in 00 - 104.4cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

13mm/12-spoke Driving wheel x 1

13mm/12-spoke Driving wheel x 1

Ref: SW1312D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 13mm. 3 feet 3 inches in 00 113.1 cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

Ref: SW1412D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke GROOVED Driving wheel x 1

14mm/12-spoke GROOVED Driving wheel x 1

Ref: SW1412DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Details as SW1412D above but tyre grooved to take rubber tyre

Diameter of drum is 14mm.

THESE WHEELS ARE SOLD SINGLY

Price: £4.32/$5.40 (Including VAT at 20%)

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

Ref: SW1512D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

Ref: SW1612D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

17mm/12-spoke driving wheel x 1

17mm/12-spoke driving wheel x 1

Ref: SW1712D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Release: JUNE 2020.

Diameter of drum is 17mm. 4 feet 3 inches in 00 147.9cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

Scalelink | OO/HO Locomotive Driving Wheels, axles, crankpins