Product Sections
Main Pages
Best Sellers
23mm/18-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JUNE 2013Diameter of drum is 23mm. 5 feet 9 inches in 00 200cm in H0THESE WHEELS ARE SOLD SINGLYEtched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.Transfers to convert SLC137 to a police-car
Rover 12/14 Saloon 1937
(Shown as a Police Car)
(Berline - Limousine)For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costs6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.
Includes two brass fixing nuts.For spacing washers see WPY3316mm Wagon/Coach/Tender wheels - 12-spoke
ABS centres, nickel tyres,
26mm Pin-point 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H0Romford 16.5mm axle with flat for grub screw (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.
Includes two brass fixing nuts.Slotted for improved grub screw location.For spacing washers see WPY33Code 100 No 6 Curved Turnout - Left
NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout. Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.
Customers outside the UK can only receive track by International standard parcel unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shippingRadii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.Only 7 remaining -05/03/2024For manual operation see SDG651 in Shinohara accessories25mm/18-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: APRIL 2014Diameter of drum is 25mm. 6 feet 3 inches in 00 217.5cm in H0 THESE WHEELS ARE SOLD SINGLY
